Ceramic PRO Care 300ml

QED for ceramic coatings

PrisNOK600,00 inkl. mva.
På lager
  • Produktinfo
  • Produktanmeldelser (0)

Ceramic Pro Care is a water-based coating that is very easy to apply. Just spray it on a clean surface of a car, wipe it dry with a microfiber towel and let it cure for at least 4 hours. The surface may be dry or wet, just make sure it is not hot to avoid instant curing of the coating. Ceramic Pro Care can be applied by anyone, not only professionals. It is a great replacement for wax. It will increase the gloss of clearcoat, make it easy to wash, protect it from UV and water spots for around one month.

A new Ceramic Pro coating will take about 2-3 weeks to cure to its full strength. During that time, some precautions should be taken.

Curing time is 2-3 weeks depending on environmental conditions such as humidity and temperature. Take special care during time period. The coating can help prevent your clear coat from water spots as it is hydrophobic. Ceramic Pro however is not bullet proof and can still get hard water spots. The coating is less likely to etch than your factory clear, but it can especially get water spots during the curing process and can be costly to remove.

During the curing process avoid:

Parking under a trees specially if there are shedding. You don’t want tree sap on a fresh coating.

Allowing bird droppings, sap or pollen to sit on the car and bake in the sun.

Washing or abrading the paint

If you notice that your car gets water spots, bird droppings, bugs, tree sap or other contaminants during the first two weeks, immediately remove it following our care instructions. Keep in mind the coating is still soft. Be gentle when working on the paint.

The only Ceramic Pro authorized after care product.

Ceramic Pro CARE is a water based easy to use coating enhancement that is designed to be user friendly that anybody can use it.

 

Skriv en produktanmeldelse og del dine erfaringer med dette produktet med andre kunder.